Tools Needed
-
What's Included
- Precision-cut frameset
- Milled Cedar top and bottom planks and
- All railstrips to build rails of your board
- All internal blocking (nose, tail, hardware, etc)
- Fin box(s)
- Leash plug
- Gore Tex vent
- 16oz bottle of Tite-Bond III and a 10oz tube of Fast Cure 5200
- Epoxy resin and hardener
- Fiberglass cloth
- Disposable gloves
- Epoxy mixing buckets
- Plastic squeegees
- A 170 page instruction manual that walks you though each step of the process
-
Tool's You'll Need (not included)
- Block plane and/or spokeshave
- Sharp chisel
- Fine tooth saw
- Utility knife
- One 27” bar clamp and six 2” spring clamps for each foot of length of board you’re building
- Some small expendibles such as masking tape, some pencils, some 80 and 120 grit sandpaper and sanding blocks/ fairing boards
- You’ll also need to build a simple ladder style table built with 2x4’s, some 1x3 strapping and sheetrock screws, used for gluing up planks. The table will double as a base for the rocker table that you’ll build your board on. More on this in your instruction manual
- If starting from scratch with no tools (and no friends with tools to loan you), plan to spend roughly $250- $300 on these things, above and beyond the kit price. Everything can be purchased at your local hardware store or online. Our go-to website for building supplies is www.jamestowndistributors.com.